High-yield synthesis of a novel water-soluble macrocycle for selective recognition of naphthalene

A novel good water-soluble macrocycle containing two pyridinium moieties was synthesized in high yield.It could form 1:1 complexes with neutral guests containing naphthalene or phenyl units in water.The water-soluble macrocycle can selectively encapsulate naphthalene to form a 1:1 complex over a variety of polycyclic aromatic hydrocarbons.     

二氧化碳催化加氢及其研究进展*

综述了二氧化碳热催化加氢的现状和研究进展,为进一步开展二氧化碳催化加氢的研究提供参考     

强化基础引导创新——核磁共振实验教学体系建设*

面对不同年级本科生和研究生设计了由浅入深、梯度渐进的核磁共振实验教学体系,利用实验教学全面介绍了核磁共振这一重要的分析手段,结合线上教学、课堂互动等新颖的教学模式,加深对重要知识点的认识和了解,与理论教学有机结合,取得了良好的教学效果。     

Janus 粒子在环境检测领域中的应用

Janus 粒子,也称为阴阳结构粒子或两面性非对称粒子,是指表面上具有两种或两种以上不同化学组成或性质的不对称粒子。目前,Janus 粒子因其独特的结构和功能已经逐渐成为生物医药、催化、材料以及防污等领域中的新型功能材料。在环境检测领域,Janus材料亦因其特殊的光学、磁学及电学性能,为提高检测灵敏度、选择性和稳定性等提供了新的研究方向。基于此,本文主要讨论了Janus材料在环境检测方面的特点、优势和相关应用。最后,本文基于本课题组的研究经验以及工作中所面临的问题,对本领域的发展和未来的研究方向提出了展望,以期对本领域的未来发展提供指导。     

碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

Two Zn(II)‐based meta‐organic frameworks: Selective detection of antibiotics and treatment activity on age‐related macular degeneration by reducing inflammasome activation

Via utilizing the mixed‐ligand method, two novel Zn(II)‐containing meta‐organic frameworks with the chemical formula of {[Zn(L)(5‐HIP)]·H₂O}_n ( 1 ) and [Zn(L)(2,6‐NDC)]_n ( 2 ) were prepared under the solvothermal conditions by applying aromatic dicarboxylic acids ligands (5‐H₂HIP = 5‐hydroxyisophthalic acid; 2,6‐H₂NDC = 2,6‐naphthalenedicarboxylic acid) and 1,4‐bis(benzimidazol‐1‐yl)‐2‐butylene (L). Due to its good water stability as well as the strong luminescent emission around room temperature, complex 2 has the high selectivity and sensibility of fluorescence detection to the ceftriaxone sodium (a kind of antibiotic) with the detection limit up to ppm lever. The treatment activity of the compounds on age‐related macular degeneration was assessed and the specific mechanism was investigated. First of all, the inflammasome activation in the endothelial cells of retina was evaluated with western blot. In addition to this, the down‐stream production of the inflammasome activation was also measured with ELISA detection kit.     

电子束敏感材料的原子尺度结构研究

分子筛和金属有机骨架(MOF)材料以其独特的孔道和骨架结构在催化、 储能、 干燥及净化和吸附分离等领域有着广泛应用, 对其结构的原子尺度表征对于深入理解其构效关系具有重要意义. 但其大孔道结构和有机骨架使得它们对电子束辐照极为敏感, 在常规透射电镜成像模式下结构会很快被破坏变为非晶, 从而无法获得孔道和骨架的原子排列信息. 最近发展起来的基于积分差分相位衬度扫描透射电子显微(iDPC-STEM)技术在电子敏感材料和轻元素组分成像方面展现出明显优势, 使得对多孔骨架材料及烃池物种的表征成为了可能. 本文综述了本课题组近期利用该技术对分子筛和MOF材料原子尺度结构方面的研究. 将iDPC-STEM技术应用到ZSM-5分子筛催化剂中, 实现了对该分子筛的原子级骨架结构的成像分析. 在MOF体系中, 利用该技术观察到MIL-101骨架内部有机连接体与金属节点的配位方式, 在此基础上解析了MIL-101结构中有机配体的连接和金属节点的苯环结构, 并观察了MOF的原子级表面、 界面和缺陷等局域结构特征. 最后对iDPC-STEM技术在原子尺度成像方面的应用潜力进行了总结与展望.     

修饰吡啶衍生物的染料敏化光阳极水氧化性能的研究

染料敏化光电化学电池(DSPECs)是构建人工光合作用体系的潜在方式,其优势在于可通过优化染料结构来拓展可见光吸收范围,从根本上提高太阳能利用效率.染料敏化光阳极在受激发产生电荷分离之后,激发电子注入TiO₂半导体导带,由于其导带位置比传统的可见光半导体,如BiVO4和Fe3O4等相比较负,因此理论上可以在较小的偏压下取得较大的光电转换效率,也更有利于和光阴极相耦合实现无偏压分解水.电荷传输动力学研究表明,注入到TiO₂导带的电子向氧化态光敏剂和催化剂的回传是造成体系能量损失的主要原因,集中体现在光电流密度和效率的降低.目前,已经报道了多种手段来减少DSPECs光阳极表面的电子回传,包括使用带有长烷基链的锚定基团对水氧化催化剂进行修饰,在半导体表面引入电子中介体以及使用核-壳结构的基底等.其中,SnO2/TiO₂基底被广泛应用在染料敏化光阳极中,这种基底可以提高光生电子的注入效率,同时两种金属氧化物之间的异质结有效抑制了电子回传,从而提高了DSPECs的光电活性.然而,核-壳结构基底需要使用原子层沉积技术来制备,所以操作相对复杂.本文基于Ru-bda(bda=2,2'-联吡啶-6,6'-二羧酸)结构的分子水氧化催化剂和带有磷酸修饰基团的三联吡啶钌通过共吸附的方式制备染料敏化光阳极,在不使用核-壳结构基底的情况下,利用吡啶衍生物对TiO₂电极表面的修饰来减少电子回传.本文利用一系列吡啶衍生物作修饰负载在TiO₂光阳极上(TiO₂|RuP,1;RuP=Ru(4,4'-(PO3H2)2-2,2'-联吡啶)(2,2'-联吡啶)2;1=Ru(bda)(L)2,bda=2,2'-联吡啶-6,6'-二羧酸,L=(10-吡啶-4-基氧基)癸基)膦酸.在100 mW/cm2的白光照射下(λ>400 nm),TiO₂|RuP,1,P1(P1=4-羟基吡啶)光阳极在0.4 V(vs.NHE)的外加偏压下获得了1 mA/cm2的光电流密度,其光电流比未修饰吡啶的光阳极增加了42%.同时,其入射光子-电流转化效率在470 nm波长的单色光光照下达到最大,为13.6%.经过吡啶衍生物所修饰的光阳极光电性能和文献中利用核-壳结构基底所制备的类似光阳极性能相当,且光电流密度随吡啶对位取代基供电性能的增强而增大.瞬态吸收光谱和电化学阻抗谱测试表明,吡啶吸附在光阳极上能有效地抑制界面上的电子回传,延长电荷分离寿命,是光电流增加的根本原因,这也表明有机小分子修饰是提高染料敏化光阳极性能的简单、有效的策略.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-laye r capacitors are widely concerned fo r their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of30 Wh/kg can be obtained in the organic electrolyte.